A cell-based smoothed radial point interpolation method with virtual nodes for three-dimensional mid-frequency acoustic problems

It is well known that the finite element method (FEM) encounters dispersion errors in coping with mid-frequency acoustic problems due to its “overly stiff” nature. By introducing the generalized gradient smoothing technique and the idea of condensed shape functions with virtual nodes, a cell-based smoothed radial point interpolation method is proposed to solve the Helmholtz equation for the purpose of reducing dispersion errors. With the properly selected virtual nodes, the proposed method can provide a close-to-exact stiffness of continuum, leading to a conspicuous decrease in dispersion errors and a significant improvement in accuracy. Numerical examples are examined using the present method by comparing with both the traditional FEM using four-node tetrahedral elements (FEM-T4) and the FEM model using eight-node hexahedral elements with modified integration rules (MIR-H8). The present cell-based smoothed radial point interpolation method has been demonstrated to possess a number of superiorities, including the automatically generated tetrahedral background mesh, high computational efficiency, and insensitivity to mesh distortion, which make the method a good potential for practical analysis of acoustic problems.     

Strategic environmental assessment in Romania: between benefits and constraints

This paper offers an overall picture of the importance of Strategic Environmental Assessment (SEA) in Romania and its opportunities and constraints. The role, scope and effectiveness of SEA in Romania are presented in two good practice examples and examined in order to highlight the strengths and weaknesses of the procedure at national and local scale. In practice, the number of SEA procedures is very high due to the legislation in force, and it is increasingly effective in decision-making about programmes and plans. SEA can be viewed as a great opportunity for the implementation of sustainable development in practice. It also continues to be an important procedural and decisional instrument for management and monitoring of socioeconomic development, spatial planning and environmental protection in Romania.     

A new experimental simulation method for the development of non-renewable hydrogen energy—Oil and gas resources

At present, the proportion of tight oil in non-renewable hydrogen energy is increasing. According to an initial exploration and attemptable practice on the exploration of tight oil, it is found that the cost can be controlled effectively and positive effects are achieved. But this technique cannot make sure the proppants filled uniformly in the long fracture. Several researches on the proppants migration experiment devices and factors influencing on proppant setting are reviewed and a new set of experimental device to simulate the laws of proppants setting in long fracture is developed. This device can simulate the main factors influencing proppants setting performance. It analyzes several factors such as wall filtration, construction displacement, sand concentration, proppant size and density, viscosity of fracturing fluid is used to rank the influencing degree of every factor. Considering the effects of mutual interference between proppants, width of fracture, rough fracture surface and fracture surface filtration during the proppants setting progress, the mathematical model of proppant setting is modified by adding sand concentration correction factor, wall effect correction factor and filtration correction factor. The experimental data verify the accuracy of the settlement model is established using the data getting from experiment.     

A Thermo‐ and Moisture‐Responsive Zwitterionic Shape Memory Polymer for Novel Self‐Healable Wound Dressing Applications

Developing wound dressings that have strong adhesion strength without causing any conglutination to the wound site is still challenging. Herein, is proposed that zwitterionic shape memory polymers can be applied as promising candidates for wound dressing. Sulfobetaine methacrylate (SBMA) is copolymerized with 2,3‐dihydroxypropyl methacrylate (DHMA) in the presence of boric acid as a cross‐linking agent. The prepared material exhibits multi‐stimuli responsive shape memory behaviors: it can rapidly return to its initial shape upon heating to 90 °C, and a gradual recovery is also observed by absorbing moisture in humid environments. The shape memory effect can be well adjusted via incorporation of sodium chloride to induce the dissociation of electrostatic interactions between PSBMA chains, leading to reduced transition temperature and faster shape recovery rate. Moreover, the dynamic nature of boron ester bonds and electrostatic interaction endows the material with effective and rapid self‐healing ability. It is also demonstrated that the deployment process of the dressing that a sample with an initially circular shape can perfectly fit and tightly bind to the wound site after moisture‐induced shape recovery. The proposed zwitterionic polymer can possibly extend the application scope of shape memory polymers and pave a new way for the design of wound dressings.     

表面织构形状对牙轮钻头轴承摩擦学性能影响的实验研究

牙轮钻头滑动轴承作为钻头破岩过程中传递载荷的关键部件,在低速重载的钻井过程中易发生黏着磨损失效。为改善牙轮钻头滑动轴承的耐磨性能,利用纳秒激光雕刻技术,在牙轮钻头滑动轴承轴颈表面加工了面积比为10%、深度为20μm的圆形、矩形、三角形及复合织构;基于赫兹相似理论,设计近似模拟钻头轴承工况的环-块配对副单元实验方案,并在UMT摩擦试验机上开展织构形状对钻头滑动轴承摩擦副摩擦因数、磨损量、温升变化和微观形貌影响规律的实验研究。结果表明:仿生织构的形状及布置方式对减摩和耐磨效果影响极大,其中圆形、矩形织构的减摩和耐磨性能最优,其次为三角形织构,而复合织构反而增大了摩擦因数及磨损量;单一织构对试件磨损量及温升的影响不大,而复合织构在增加摩擦的同时温度有明显升高,不利于井下高温环境下延长牙轮钻头寿命。     

Fabrication of poly(ε‐caprolactone) (PCL)/poly(propylene carbonate) (PPC)/ethylene‐α‐octene block copolymer (OBC) triple shape memory blends with cycling performance by constructing a co‐continuous phase morphology

In this paper, a triple shape memory material was prepared by ultra‐simple melt blending from poly(ε‐caprolactone) (PCL), poly(propylene carbonate) (PPC) and ethylene‐α‐octene block copolymer (OBC). The obtained material possessed a co‐continuous phase morphology and presented an excellent triple shape memory effect (triple‐SME). Theoretical prediction demonstrated that a special continuous phase morphology could be constructed by adjusting the proportions of the blend. Moreover, the results indicated that a close relationship existed between the phase morphology and the triple‐SME of PCL/PPC/OBC. The sample with 35 vol% PPC content contributed to the formation of a continuous phase morphology and exhibited the optimal triple‐SME. Additionally, the sample PCL/PPC/OBC (32.5/35/32.5) showed outstanding structure and performance stability during cycle loading–unloading tests, which evidenced the prominent cycling shape memory property (nearly 100% shape fixing and recovery of temporary shape). Overall, this work could provide an efficient, convenient and recyclable method to obtain high‐performance shape memory materials. © 2020 Society of Chemical Industry     

基于DEM的振动筛筛孔形状对潮湿原煤筛分效果影响的研究

随着原煤含水量的增加,引起原煤颗粒间相互粘聚,影响振动筛筛分效率。基于离散元法,运用EDEM软件模拟了潮湿原煤颗粒在圆形筛孔、方形筛孔和矩形筛孔的筛分过程,并且以筛分效率和阻碍粒排出率为衡量指标,对振动筛筛孔形状影响潮湿煤筛分效果进行了研究。结果表明:在筛孔名义尺寸相同的情况下,潮湿煤在矩形筛孔筛面上的筛分效果最好,方形筛孔次之,圆形筛孔最差。     

Adaptive fuzzy control for nontriangular form systems with time-varying full-state constraints

This article investigates an adaptive fuzzy tracking control problem for a class of nontriangular form systems with asymmetric time-varying full state constraints. Unknown functions are approximated by the fuzzy logic systems. A domination approach is employed to tackle the nontriangular form structure. Time-varying asymmetric barrier Lyapunov functions (ABLFs) are adopted to ensure full-state constraints satisfaction. Based on the backstepping technique and time-varying ABLFs, an adaptive controller is proposed and guarantees that all the signals in the closed-loop system are ultimately bounded and the time-varying full state constraints are met. Simulation examples are presented to further demonstrate the effectiveness of the proposed approach.